Fencing

ERECT , MAINTAIN AND MONITOR WILDLIFE FENCES

Plan carefully before you put up the fence

• Place boundary bar cons where the fence must be put up 
• The area must be cleaned and the ground level must be leveled out
• When you plan the fence make sure the fence is in a straight line and that if there is a ' kopie ' you can go around it

Putting up a fence.

• Folding fences must be put at a river crossing
• If you put up a fence make sure that you put in the stud poles in at least every 300 meters and the y standards every 20 meters and droppers every 1 - 2 meters
• The stud poles must be in the ground , the depth is different according to the tipe of soil

Monitor fences

• Make sure that regular fence checking are done
• Report all the places a fence is broken
• Nabouring farms are alerted for checking fences

Maintain a fence

• A fence is prepared that reach the standers
• Rivers are to prepare require standards 

You get 4 tips of wire

• Steel wire ( this is the strongest tipe of wire and are used for the long horizontal strings on a fence)
• Binding wire ( this wire is used to tie the steel wire to the stud pole , y standards and the droppers)
• Thorned wire ( this tipe of wire has little thorn shaped pieces on the wire to keep small animals in , this tipe of wire is normally used at the bottom half of a wire or on a cattle fence
• Mesh wire ( this tipe of wire are used to keep small game inside the farm)